Jul
27
Basic CAD Terms
Recently someone asked me if I could briefly go over some computer-aided drafting terms.
First of all, I'll
3 min read
Latest
Jul
27
Curves and Splines in CAD
Computed-aided drafting and computer-generated imaging software involve the representation of irregular curves. As storing thousands of points for every curve
3 min read
Jul
27
Design for Manufacturing: Swarf and Burr Removal
This article provides guidance on ensuring that burrs are removed from the product during the machining process. It also discusses
2 min read
Jul
27
Electron Beam Melting 3d Printing
Electron beam melting is a similar process to selective laser melting. Electron beam melting differs from selective laser melting in
3 min read
Jul
26
Design for Manufacturing: Design for Assembly
Design for Assembly incorporates several significant tools to achieve a more cost-effective product. Engineers must determine if a product should
4 min read
Jul
26
Design for Manufacturing: Boring
This article looks at the recommended design practices for boring machined parts.
Boring is the process of subtractive manufacturing where
1 min read
Jul
26
Design for Manufacturing: Stamping Presses
This rule provides instructions on selecting presses in stamping operations based on the part type and speed.
Stamping presses comprise
1 min read
Jul
26
How is Poka-yoke Used in Fixture Design?
Poka-yoke, the process by which mistakes are engineered out of a design, is often incorporated into fixture design. Fixturing relies
2 min read
Jul
26
How are Injection Molding and Die Casting Related?
Injection molding and die casting are similar manufacturing processes that produce parts for product assemblies. While these processes follow a
2 min read
Jul
26
Design for Manufacturing: Part Fixturing
This article looks at designing products in such a way as to promote viable fixturing use.
Parts which are to
1 min read