Design for Manufacturing: Secondary Operations on Rods
This rule involves the minimization of secondary machining operations on extruded rods cut from bar…
Design for Manufacturing: Bar Stock Diameter and Standard Tooling
This article looks at the risks associated with special bar stock with the goal of…
Design for Manufacturing: Turning Small Parts
When designing turned parts, consideration must be made for the geometry of the end part.…
Circuit Analysis: Transformers
Transformers convert one alternative current sinusoidal signal from one voltage level to another without changing…
Design for Manufacturing: Corners in Machined Parts
Today we’re going to look at the economics and design considerations for using sharp corners…
Design for Manufacturing: Knurling
Knurling is the process by which repeated patterns are cut or rolled onto a material.…
Design for Manufacturing: Part Fixturing
This article looks at designing products in such a way as to promote viable fixturing…
Design for Manufacturing: Drilling Surface Requirements
This article considers the requirements for drilling surfaces in the context of minimizing manufacturing flow…
Design for Manufacturing: Interrupted Cut Machining
What is interrupted cut machining? How can you do it without breaking cutters? This article…
Design for Manufacturing: Machined Corners
This article provides information on the difficulties associated with machining sharp corners and why to…